Mini Speedmount
The TRIO Mini Speedmount is a sturdy and stylish mounting solution for those wanting the lowest profile way to secure their Mini Starlink dish onto their vehicle WHILE protecting it from all sides! This mount is extremely low profile at only 1.8” in height (1.9” with magnets) and allows the Starlink kickstand or pole mount to be used simultaneously.
Available in White and Black! Choose from a wide array of mounting options that fit your needs.
To assemble, simply slide the 2 pieces into place around the Starlink Mini dish and tighten the SS bolts into the SS nylon locknuts.
Strong 4.5mm Polycarbonate/Lexan Cover available to protect the face of the dish if desired. This will require using the outermost corner holes to secure it in place.
** Strength: This mount has been designed to be used (and has been tested) at high speeds. It is ultimately up to the end user to make sure the antenna mount is secured appropriately.
For additional info and mounting instructions, see below.
The TRIO Mini Speedmount is a sturdy and stylish mounting solution for those wanting the lowest profile way to secure their Mini Starlink dish onto their vehicle WHILE protecting it from all sides! This mount is extremely low profile at only 1.8” in height (1.9” with magnets) and allows the Starlink kickstand or pole mount to be used simultaneously.
Available in White and Black! Choose from a wide array of mounting options that fit your needs.
To assemble, simply slide the 2 pieces into place around the Starlink Mini dish and tighten the SS bolts into the SS nylon locknuts.
Strong 4.5mm Polycarbonate/Lexan Cover available to protect the face of the dish if desired. This will require using the outermost corner holes to secure it in place.
** Strength: This mount has been designed to be used (and has been tested) at high speeds. It is ultimately up to the end user to make sure the antenna mount is secured appropriately.
For additional info and mounting instructions, see below.
The TRIO Mini Speedmount is a sturdy and stylish mounting solution for those wanting the lowest profile way to secure their Mini Starlink dish onto their vehicle WHILE protecting it from all sides! This mount is extremely low profile at only 1.8” in height (1.9” with magnets) and allows the Starlink kickstand or pole mount to be used simultaneously.
Available in White and Black! Choose from a wide array of mounting options that fit your needs.
To assemble, simply slide the 2 pieces into place around the Starlink Mini dish and tighten the SS bolts into the SS nylon locknuts.
Strong 4.5mm Polycarbonate/Lexan Cover available to protect the face of the dish if desired. This will require using the outermost corner holes to secure it in place.
** Strength: This mount has been designed to be used (and has been tested) at high speeds. It is ultimately up to the end user to make sure the antenna mount is secured appropriately.
For additional info and mounting instructions, see below.
-
Manufactured from waterproof and UV thermoplastic that will not warp.
-
Assembled Dimensions:
Length: 12.35"
Width: 10.9"
Height: 47mm (1.85”)
Weight (~2 lbs)
Color options: White or BlackMounting options: Through-bolt, magnets, VHB adhesive mounting pads, combination of VHB adhesive and magnets, or suction cups
-
⚠ Using Starlink™ in motion may violate your Terms of Service depending on your service location. Consult your Terms of Service to determine if this applies to you.
⚠ Given the varying conditions of surfaces this can be mounted to, it is ultimately up to the end user to make sure the antenna mount is sufficiently secured. By purchasing and using this product, you agree to waive any claims that you may have against TRIO Flatmount, www.trioflatmount.com, and included entities, from any and all liability for any loss, damage, expense or injury, including death, that may suffer as a result of the use of the product, due to any cause whatsoever.
-
Please visit our FAQ page for our return policy and our warranty.
https://www.trioflatmount.com/faq
