Gen 3 12V Conversion Box (For Aftermarket Router)

Gen 3 12V Conversion Box (For Aftermarket Router)

$225.00 Sale • Save
12V Connection Type

Item is in stock Only 0 left in stock Item is out of stock Item is unavailable

Adding to Cart Added to Cart

Need a a Power Cable?

Our Gen 3 12V Conversion box contains our POE injector and 12-56V converter inside to allow plug and play use with an aftermarket router like Peplink (not included). This eliminates the need to use the Gen 3 router in addition to your existing aftermarket router which results in more power savings (~15w draw from the Gen 3 router)!

Simply connect the included SAE 5’ cable to a 12V power source (DC input range is 10-30V) and plug in your Gen 3 Starlink ethernet cable into the port labeled DISH.

** Works with snowmelt! Our POE has been load tested to over 200W which is more than enough for Gen 3 snowmelt.

Power Consumption tested over 1 hour with constant upload/download internet: ~40 Wh (~3A at 13.8V) - not including aftermarket router power consumption which will vary depending on your specific model.

Please select the appropriate connector for your application from the drop down: bare wire leads or ring terminals.

** We recommend using 15A fuse on your 12V fuse block or adding an in-line fuse on the positive lead.

If connecting to a 12V fuse block, please use a 15A fuse (We recommend not lengthening the included 12V power supply cable length, but if needing to please size appropriately based on cable length and fuse size. Seek professional electrical assistance if required).

If connecting to a 24V fuse block, please use a 10A fuse

⚠ Given the varying conditions and applications that this can be installed in, it is ultimately up to the end user to make sure the power supply is safely and appropriately connected to 12V or 24V power. By purchasing and using this product, you agree to waive any claims that you may have against TRIO Flatmount, www.trioflatmount.com, and included entities, from any and all liability for any loss, damage, expense or injury, including death, that may suffer as a result of the use of the product, due to any cause whatsoever.

You might also like

Customer Reviews

Based on 5 reviews
80%
(4)
20%
(1)
0%
(0)
0%
(0)
0%
(0)
B
Bill Johnson
Works Well

This is a nice box which eliminates the need to use the normal 120VAC power supply and Gen 3 router when using the Starlink “Standard” Gen 3 satellite antenna system.

This box reduces the power draw from 90-120 watts 120VAC down to about 40-55 watts when powered on 24VDC. Easy install and runs cool. Note that the reduced 24VDC draw does not include the draw from your Peplink or other branded router.

The box seems a little large, but I guess the size is dictated by the power converter module. I would have given it 5 stars, but the price seems high as well.

A
AVan
Really Nice

The 12v conversion box is a really nice product. Very well done. Thank you!

S
Steven Toney
12v unit for gen3 Starlink

Unit works great for simple 12v dc input to run SL with my pepwave router

Upgrade to unit box to have on/off switch as part of box would be icing on a nice cake

Super support from Tim

B
Branimir Kovac
Gen3 12V conversion

After doing a lot of research on Facebook and the internet I recently purchased a Gen3 mount and the 12V Conversion box. This product is great, its plug & play. There is no need to cross wires and crimp like the other POE's require. Tim was very responsive and great to work with. Thank you Tim for making products that BOOMERS can easily use.

B
Branimir Kovac
Gen3 12V conversion

After doing a lot of research on Facebook and the internet I recently purchased a Gen3 mount and the 12V Conversion box. This product is great, its plug & play. There is no need to cross wires and crimp like the other POE's require. Tim was very responsive and great to work with. Thank you Tim for making products that BOOMERS can easily use.